SAE AIR1168/1 Thermodynamics of Incompressible and Compressible Fluid Flow
作者:标准资料网
时间:2024-05-18 13:45:39
浏览:8866
来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE AIR1168/1
Title:Thermodynamics of Incompressible and Compressible Fluid Flow
Issuing Committee:Ac-9 Aircraft Environmental Systems Committee
Scope: The fluid flow treated in this section is isothermal, subsonic, and incompressible. The effects of heat addition, work on the fluid, variation in sonic velocity, and changes in elevation are neglected. An incompressible fluid is one in which a change in pressure causes no resulting change in fluid density. The assumption that liquids are incompressible introduces no appreciable error in calculations, but the assumption that a gas is incompressible introduces an error of a magnitude that is dependent on the fluid velocity and on the loss coefficient of the particular duct section or price of equipment. Fit 1A-1 shows the error in pressure drop resulting from assuming that air is incompressible. With reasonably small loss coefficients and the accuracy that is usually required in most calculations, compressible fluids may be treated as incompressible for velocities less than Mach 0.2. At higher velocities and for large loss coefficients (K(sub)t and 4fL/D), compressible flow analysis should be used. ould be used.
Title:Thermodynamics of Incompressible and Compressible Fluid Flow
Issuing Committee:Ac-9 Aircraft Environmental Systems Committee
Scope: The fluid flow treated in this section is isothermal, subsonic, and incompressible. The effects of heat addition, work on the fluid, variation in sonic velocity, and changes in elevation are neglected. An incompressible fluid is one in which a change in pressure causes no resulting change in fluid density. The assumption that liquids are incompressible introduces no appreciable error in calculations, but the assumption that a gas is incompressible introduces an error of a magnitude that is dependent on the fluid velocity and on the loss coefficient of the particular duct section or price of equipment. Fit 1A-1 shows the error in pressure drop resulting from assuming that air is incompressible. With reasonably small loss coefficients and the accuracy that is usually required in most calculations, compressible fluids may be treated as incompressible for velocities less than Mach 0.2. At higher velocities and for large loss coefficients (K(sub)t and 4fL/D), compressible flow analysis should be used. ould be used.
下载地址:
点击此处下载